Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

The Massachusetts Hoisting License Exam in Drawings Load Charts in 4 Steps, One Topic per Page

For forklift, excavator and crane operators: load charts, sling angles, hand signals, stability, power line clearances, Dig Safe, trenches and pre-shift inspections. Every topic has its own page: the drawing first, then what you need to remember. 67 illustrated pages.

START STUDYING THIS WAY

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach rule and each calculation drawn, with the explanation right next to it
67 illustrated pages8 parts, from who needs the license to the illustrated glossary
Up-to-date sourcesM.G.L. c. 146, 520 CMR 6.00 and OSHA 1926 Subpart CC
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the numbers and rules you need to know:

Tipping axis: outrigger pads, track edge or wheel line.
Tipping axis: outrigger pads, track edge or wheel line.
9,800 lb chart − 620 lb deductions = 9,180 lb; an 8,500 lb load uses 93%.
9,800 lb chart − 620 lb deductions = 9,180 lb; an 8,500 lb load uses 93%.
Sling angle factors: 90° 1.000 · 60° 1.155 · 45° 1.414 · 30° 2.000
Sling angle factors: 90° 1.000 · 60° 1.155 · 45° 1.414 · 30° 2.000
Blind lifts: test radios on site, dedicated channel, hands-free, stop if contact is lost.
Blind lifts: test radios on site, dedicated channel, hands-free, stop if contact is lost.
OSHA Table A: 10, 15, 20, 25, 35 and 45 ft by voltage; over 1,000 kV the utility decides.
OSHA Table A: 10, 15, 20, 25, 35 and 45 ft by voltage; over 1,000 kV the utility decides.
Every shift, a competent person checks controls, leaks, hook, rope, tires, ground and level (OSHA 1926.1412(d)).
Every shift, a competent person checks controls, leaks, hook, rope, tires, ground and level (OSHA 1926.1412(d)).
20 ft, 50 ft, 10 ft, 72 hours, 5 ft, 2 ft, 25 ft, 24 in, 490 and 150 lb/ft³: the number wall.
20 ft, 50 ft, 10 ft, 72 hours, 5 ft, 2 ft, 25 ft, 24 in, 490 and 150 lb/ft³: the number wall.
Radius vs. boom length, deductions, 360° column, no averaging: wrong and right side by side.
Radius vs. boom length, deductions, 360° column, no averaging: wrong and right side by side.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 63 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're looking at a two-leg sling question on the practice test. The load is 4,000 lb and the legs hang at 45°. How much does each leg actually carry?

The manual has the answer, buried in a paragraph about horizontal angles, load-angle factors and trigonometry. You read it twice and the number still won't stick.

Sling angle factors: 90° 1.000 · 60° 1.155 · 45° 1.414 · 30° 2.000

In this book the sling angle factor is one page: the same load hanging at 90°, 60°, 45° and 30°, with the factor printed under each drawing: 1.000, 1.155, 1.414, 2.000. You watch the legs get flatter and the tension climb.

The same goes for the load chart and its deductions, where the machine tips, Table A clearances, boom and swing signals and the pre-shift walk-around: each one has its own page.

Next time the question says 45°, you split the load in two, multiply by 1.414 and get 2,828 lb per leg. You understand it and you work it out without going back to the manual.

COMPARE FOR YOURSELF

Same Topic, Two Ways to Study It

THIS
  • The manual: line after line of text
  • Load chart math explained only in words
  • You walk into the exam with doubts
To determine the net rated capacity of the crane for a given lift, the operator shall first establish the operating radius, measured horizontally from the centerline of rotation to the center of gravity of the suspended load, together with the corresponding boom length and configuration. The gross capacity obtained from the manufacturer's load chart shall then be reduced by the weight of all load-handling devices, including the hook block, slings, shackles and stowed attachments, before the resulting value is compared with the total weight of the load.
FOR THIS
  • The load chart problem in one drawing
  • The deductions and the math in a box
  • You see it and you get it
9,800 lb chart − 620 lb deductions = 9,180 lb; an 8,500 lb load uses 93%.
CONTENTS

Take a Look at the 8 Parts and 63 Topics

The license and the exam, the machine as one system, load charts, rigging and sling angles, hand signals, site hazards, inspections and a final review: 67 pages, all illustrated.

IThe License and the Exam · pp. 5-10
  1. Who Needs a Massachusetts Hoisting License
  2. License Classes: Find Your Machine
  3. From Application to Test Day
  4. What the Written Exam Asks
  5. How to Read a Regulation Without Getting Lost
  6. How to Use This Book
IIThe Machine as One System · pp. 11-17
  1. Engine, Hydraulics, Boom, Counterweight
  2. Hydraulics in One Drawing
  3. Leverage: Load × Distance
  4. Center of Gravity: Machine and Load
  5. The Forklift Stability Triangle
  6. Tipping Axis on a Crane and an Excavator
  7. Ground Bearing and Outrigger Pads
IIIReading a Load Chart · pp. 18-27
  1. What a Load Chart Is (and Isn't)
  2. Radius Is Not Boom Length
  3. The 4 Steps, Same Order Every Time
  4. Between Two Numbers: Use the Smaller
  5. Deductions: What Comes Off the Capacity
  6. Structural vs. Stability Zone
  7. Parts of Line and Line Pull
  8. Estimating the Weight of the Load
  9. Worked Load Chart Problem
  10. Forklift Data Plate and Load Center
IVRigging and Sling Angles · pp. 28-37
  1. Sling Types at a Glance
  2. Three Hitches, Three Capacities
  3. The Sling Angle Factor
  4. Worked Two-Leg Sling Problem
  5. Finding the Load's Center of Gravity
  6. Shackles, Hooks and Eyebolts
  7. Wire Rope Clips: Never Saddle a Dead Horse
  8. Protect the Sling: Edges and D/d
  9. Sling Inspection and Removal
  10. Taglines and Hands Off the Load
VHand Signals and Communication · pp. 38-43
  1. Hoist, Lower, Stop: The Core Signals
  2. Boom, Swing and Travel Signals
  3. Emergency Stop: Anyone Can Give It
  4. Who Can Be a Signal Person
  5. Radio Signals and Blind Lifts
  6. Signal Quiz: Read the Figure
VISite Hazards · pp. 44-52
  1. Power Lines: The 20-Foot Rule
  2. Table A Clearances by Voltage
  3. Encroachment Prevention
  4. Dig Safe in Massachusetts
  5. Trenches: When You Need Protection
  6. Soil Types and Spoil Piles
  7. Swing Radius and Barricades
  8. Wind, Weather and Slopes
  9. Backing Up and Pedestrians
VIIInspections and Safe Operation · pp. 53-60
  1. The Pre-Shift Walk-Around
  2. Operational Checks Before the First Lift
  3. Frequent, Monthly and Annual Inspections
  4. Wire Rope: Removal Criteria
  5. Forklift Daily Check
  6. Refueling, LP Tanks and Batteries
  7. Shutdown and Parking
  8. Lockout/Tagout and Tag on the Controls
VIIIReview Before the Exam · pp. 61-67
  1. Formula Sheet on One Page
  2. Numbers to Know Cold
  3. The Most Frequent Mistakes on Load Charts
  4. The Most Frequent Mistakes in Rigging and Signals
  5. How to Answer a Multiple-Choice Question
  6. Checklist for the Night Before and Test Day
  7. Illustrated Glossary

One Page, One Topic, All Clear

Think of it this way:

You're at the test table. The question gives you a chart capacity of 9,800 lb, a hook block, slings and an 8,500 lb load. You have to decide if that lift is within capacity.

In the book you open the worked load chart page and it's all drawn: 9,800 lb on the chart, minus 620 lb in deductions, leaves 9,180 lb. The 8,500 lb load uses 93% of it.

OSHA Table A: 10, 15, 20, 25, 35 and 45 ft by voltage; over 1,000 kV the utility decides.

Next question: a 115 kV line runs next to the swing radius. You turn to the Table A page: over 50 and up to 200 kV, 15 feet. One look and you have the number.

MA Hoisting License Illustrated is 67 illustrated pages in 8 parts, ending with a one-page formula sheet, the numbers to know cold and an illustrated glossary.

What you see drawn, you don't have to memorize.

What's Inside MA Hoisting License Illustrated:

Ipp. 5-10

The License and the Exam

Who needs a Massachusetts hoisting license, how to find your machine's class, the steps from application to test day, what the written exam asks and how to read a regulation.

IIpp. 11-17

The Machine as One System

Engine, hydraulics, boom and counterweight as one system, leverage, center of gravity, the forklift stability triangle, tipping axis and outrigger pads.

IIIpp. 18-27

Reading a Load Chart

What a load chart is, radius vs. boom length, the 4 steps in the same order, deductions, structural vs. stability zone, parts of line, a worked problem and the forklift data plate.

IVpp. 28-37

Rigging and Sling Angles

Sling types, three hitches, the sling angle factor, a worked two-leg problem, shackles, hooks, wire rope clips, edge protection, inspection and taglines.

Vpp. 38-43

Hand Signals and Communication

Hoist, lower and stop, boom, swing and travel signals, emergency stop, who can be a signal person, radio and blind lifts, and a signal quiz.

VIpp. 44-52

Site Hazards

Power lines and the 20-foot rule, Table A clearances, encroachment prevention, Dig Safe, trenches, soil types, swing radius, weather, slopes and pedestrians.

VIIpp. 53-60

Inspections and Safe Operation

The pre-shift walk-around, operational checks, frequent, monthly and annual inspections, wire rope removal, forklift daily check, refueling, shutdown and lockout/tagout.

VIIIpp. 61-67

Review Before the Exam

A one-page formula sheet, the numbers to know cold, the most frequent mistakes, how to answer multiple choice, a test-day checklist and an illustrated glossary.

At the end of the book: A one-page formula sheet, the numbers to know cold, a signal quiz and an illustrated glossary.

Plus: 2 Free Books

Hoisting Exam Practice Questions

BONUS 1: «Hoisting Exam Practice Questions»

Value on its own: US$ 17.90

Exam-style questions on load charts, rigging, signals and safety, each answer explained with a drawing, so you see what you know before test day.

15 Operator Mistakes: Before & After

BONUS 2: «15 Operator Mistakes: Before & After»

Value on its own: US$ 14.90

The most frequent mistakes on the jobsite and on the test, each one drawn wrong and then right, for a fast review the night before.

MA Hoisting License Illustrated with 2 Free Books

  • MA Hoisting License Illustrated: 67 illustrated pagesUS$ 63
  • BONUS 1: Hoisting Exam Practice QuestionsUS$ 17.90
  • BONUS 2: 15 Operator Mistakes: Before & AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT MA HOISTING LICENSE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you MA Hoisting License Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're studying for the license

You're studying for the license

You start from the machine you already know and go topic by topic, each one drawn, in the same order every time.

Your exam date is set

Your exam date is set

The formula sheet, the numbers to know cold and the practice questions show you what you've got down and what to go over again.

You already run the machine

You already run the machine

Load charts, sling angles and power line clearances on pages you can print and keep in the truck, to check before a lift.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT MA HOISTING LICENSE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try MA Hoisting License Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already run the machine but haven't taken a written test in decades?

Yes. It's written for people who know the machine and need the written part: short sentences, real numbers with units and a drawing for every topic. It covers forklifts, excavators and cranes, and Part I shows you how to find your machine's class in 520 CMR 6.00. It's built for the Massachusetts license: the OSHA, rigging and signal pages apply anywhere, but it isn't a prep book for NCCCO or other states' exams.

Where does the content come from?

From the official texts: M.G.L. c. 146 and 520 CMR 6.00 for the Massachusetts license, the Dig Safe law, OSHA 29 CFR 1926 Subparts CC and P, 1926.602 and 1910.178, and ASME B30 hand signals. Each page says which rule it's based on.

Is it official material?

No. It's an independent study book. It isn't published by or affiliated with the Massachusetts Department of Public Safety, OSHA or any school. It doesn't come with a certificate or license: the hoisting license is issued by the state after you pass its exam.

Does it replace a hoisting course or training?

No. It helps you study and review. Hands-on training, the manufacturer's manual and the load chart of each machine still come first.

Are the practice questions the ones on the exam?

No. They're written for this book, in the style of the exam, to help you check what you know. They aren't official exam questions.

When and how do I get it?

The book and the 2 free books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-time payment. No subscription.

Can I have it on paper?

Yes. The PDF is made to print, at home or at a copy shop, so you can keep it in the truck or the cab.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading with nothing to show for it.

Sling angles and load charts: you see them drawn, and they make sense.

You walk into the exam knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT MA HOISTING LICENSE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.